Canon NP6218 Selecting the Density Adjustment Method for Standard Mode, Initializing User Mode

CHAPTER 1 GENERAL DESCRIPTION

9.	Selecting the Density Adjustment Method for Standard Mode (			)
1)	Hold down the AE key for 4 sec or more.
	• The display indicates “	”.
2)	Enter o using the keypad so that the display indicates “		”.

3)Press the Start key.

• The display indicates ‘9-1’.

Selecting the density adjustment method for standard mode	Settings
AE (automatic)	9-1
Manual	9-0

Table 1-407

4)Enter q or p using the keypad to select AE or manual so that the display indicates the new specification (if manual, indicates ‘9-0’).

5)Press the Start key.

• The new specification is stored, and the display returns to “ ”.

6)Press the AE key.

• The copier returns to standby state.

10. Initializing User Mode (		)
1)	Hold down the AE key for 4 sec or more.
	• The display indicates “	”.
2)	Enter p using the keypad so that the display indicates “		”.

3)Press the Start key.

• The display indicates ‘0-1’.

4)Enter p using the keypad.

• The display indicates “	”.
5) Press the Start key.
• User mode is initialized, and the display returns to “		”.

6)Press the AE key.

• The copier returns to standby state.

COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-17