Canon FY8-13EX-000, NP6218 service manual Cleaning the Feeder with ADF installed-option, 1-16

CHAPTER 1 GENERAL DESCRIPTION

4)Enter q or p using the keypad to specify ‘On’ or ‘Off’.

•The display indicates the new setting (if Off, ‘4-0’.)

5)Press the Start key.

•The auto cassette change function is turned on or off, and the display returns to

“ ”.

6)Press the AE key.

• The copier returns to standby state.

7. Turning On/Off the Auto Sort/Non-Sort (with ADF and sorter installed—option)

	(	)
1)	Hold down the AE key for 4 sec or more.
	• The display indicates “		”.
2)	Enter t using the keypad so that the display indicates “			”.

3)Press the Start key.

The display indicates the current setting (if initial settings, ‘5-1’).

Turning on/off the auto cassette change mechanism	Settings
On	5-1
Off	5-0

Table 1-406

4)Enter q or p using the keypad to select On or Off.

•The display indicates the new setting (if Off, ‘5-0’).

5)Press the Start key.

•The auto cassette change will be either On or Off, and the display returns to

“ ”.

6)Press the AE key.

• The copier returns to standby state.

8.	Cleaning the Feeder (with ADF installed—option) (		)
1)	Hold down the AE key for 4 sec or more.
	• The display indicates “	”.
2)	Enter y using the keypad so that the display indicates “		”.

3)Place about 10 sheets of blank copy paper (white) on the ADF’s original tray.

4)Press the Start key.

• Feeder cleaning starts; to stop, press the Stop key.

During the cleaning operation, “	” on the display flashes; then, “	” stops
flashing and remains on.

5)Press the AE key.

• The copier returns to standby state.

1-16 COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)