Canon FY8-13EX-000 E. Cassette Feeding Module, Detaching/Attaching the Pick-Up Roller, 5-36

CHAPTER 5 PICK-UP/FEEDING SYSTEM

E. Cassette Feeding Module

1. Detaching the Copier from the Cassette Feeding Module

1)Disconnect the copier’s power plug.

2)Disconnect the connector q of the cassette feeding module.

q

Figure 5-737

3) Hold the copier’s grips, and detach the copier from the cassette feeding module.

2. Detaching/Attaching the Pick-Up Roller

See p. 5-14 “1. Detaching the Pick-Up Roller Unit”, p. 5-17 “2. Detaching the Pick-Up Roller” and p. 5-18 “3. Points to Note When Attaching the Pick-Up Roller.”

3. Detaching the Pick-Up Clutch

1)Detach the pick-up drive unit. (See p. 7-14 “1. Detaching the Pick-Up Drive Unit.”)

2)Detach the cassette motor. (See p. 7-15 “2. Detaching the Cassette Motor.”)

3)Remove the three screws q, and detach the bushing w and side plate e; then, detach the pick-up clutch r.

rw

e

q

Figure 5-738

5-36 COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)