Canon FY8-13EX-000, NP6218 service manual Image Formation System

CHAPTER 4 IMAGE FORMATION SYSTEM

5)Detach the transfer roller and the static eliminator.

6)Detach the transfer guide.

7)While butting the two heaters against the transfer guide as shown in Figure 4-326, fix them in place using two screws e; then, fix the harness using two harness bands r

(front, rear).

8)Fix the harness with two SK binders t (front, rear) in place, and insert it into the transfer guide.

Figure 4-326

Caution:

When fixing the harness in place, make sure that the cap portions of the terminal

are alternated as shown in Figure 4-327; if bundled in parallel, the harness will come into contact with the transfer roller.

Figure 4-327

COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-45