Canon FY8-13EX-000, NP6218 service manual G. Specification Settings Mode, 10-107

CHAPTER 10 TROUBLESHOOTING

G. Specification Settings Mode [5]

•To activate specification settings mode, press [5] on the keypad and then the AE key.

•To select an item, press the appropriate key on the keypad and then the Start key.

•To change the setting, press the appropriate keys on the keypad and then the AE key.

•To clear an item, press the Clear key.

•A press on the Start key executes the respective operation.

No.	Description				Remarks
501	Characteristics storage for	See p. 10-43.
	multifeeder paper width sensor
502	Copy density notation switching	9 steps:		0
	(9/17 steps)	17 steps:			1
		default:		0 (9 steps)
503	Auto power-off cancel	• When ‘1’ is entered on the keypad, the
		notation will be ‘ON’, activating the auto
		power-off function.
		• When ‘0’ is entered on the keypad, the
		notation will be ‘OFF’, de-activating the auto
		power-off function.
		default: on.
		The auto power-off period is set in user mode;
		since the copier’s WAIT time is 0, it is best to
		keep the auto power-off mechanism to be
		enabled.
504	Copy count upper limit	settings:		0 to 99
		default:		0
		When set to ‘0’, the upper limit will be 100
		copies.
505	Universal cassette paper size	See p. 10-44.
		settings:		0 to 14
		default:		0
506	Separation static eliminator output	002:		2.5 kV
	voltage switching	004:		4 kV
		default:		0
507	Fixing forced wait	When activated, the period of initial rotation is
		increased; activate it if the fixing on the first copy
		is poor because of low temperature conditions.
		0:	disabled
		1:	enabled
		default:		0
508	Fixing control temperature	001:		225°C See p. 10-32.
	switching	002:		215°C
		003:		200°C
		default:		002

Table 10-17

COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 10-107