Canon NP6218, FY8-13EX-000 E. Adjustment Mode, 10-102, Leading edge margin adjustment for

CHAPTER 10 TROUBLESHOOTING

E. Adjustment Mode [3]

•To activate adjustment mode, press [3] on the keypad and then the AE key.

•To select an item, press the appropriate key on the keypad and then the Start key.

•To change the setting, press the appropriate keys on the keypad and then the AE key.

•To cancel an item, press the Clear key.

•A press on the Start key executes the respective operation.

•If the value is a negative value, ‘%’ is turned on; to enter a negative value, press the % key and the value on the keypad.

No.	Description	Settings			Remarks
301	Automatic lamp intensity		See p. 10-11.
	adjustment for AE scans
302	Copy density (development bias)	-26 ~ +26	See p. 10-13.
	reference point adjustment for		default:	0
	AE mode
303	Copy density (development bias)	-26 ~ +26	See p. 10-13.
	slope adjustment for AE mode		default:	0
304	Fixing heater resistance storage		See p. 10-31.
305	Leading edge margin adjustment	0 ~ 63	A higher value delays the copy
	(registration roller ON timing)		paper in relation to the image,
			reducing the margin.
			default:	32	unit:	0.27 mm
306	Leading edge non-image width	0 ~ 63	A higher setting increases the
	adjustment (timing at which		leading edge non-image width.
	blank open/close shutter for		default:	32	unit:	0.27 mm
	blank exposure is closed)
307	Leading edge registration adjust-	0 ~ 63	A higher setting delays the copy
	ment for right face in page separa-		paper in relation to the image.
	tion (registration roller ON timing)		default:	32	unit:	0.27 mm
308	Leading edge margin adjustment for	0 ~ 63	A higher setting increases the
	right face in page separation (timing		leading edge margin.
	at which blank shutter is closed)		default:	32	unit:	0.27 mm
309	Trailing edge non-image width	0 ~ 63	A higher setting reduces the trailing
	adjustment (timing at which		edge margin.
	open/close shutter for blank		default:	32	unit:	0.27 mm
	exposure is opened)
310	Leading edge non-image width	0 ~ 63	A higher setting reduces the trailing
	for multifeeder (timing at which		edge margin.
	the open/close shutter for blank		default:	32
	exposure is opened)		unit:	0.27 mm

Table 10-15-1

Note: A press on the Start key when in No. 305, 306, 307, or 308 makes copies in the mode that has been effective before the activation of the mode; when executing No. 307 or 308, it is recommended that page separation mode be selected before activating service mode.

10-102 COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)