Canon NP6218, FY8-13EX-000 service manual Detaching the Blank Shutter Solenoid

CHAPTER 4 IMAGE FORMATION SYSTEM

4)Remove the three screws r, and detach the blank exposure lamp t.

r

t

Figure 4-312

5. Detaching the Blank Shutter Solenoid

1)Detach the blank exposure assembly.

2)Detach the blank shutter upper plate, and disconnect the connector q. (See “3. Detaching the Blank Exposure Assembly on p. 4-34.”)

3)Remove the E-ring w, and detach the link arm e from the blank shutter.

4)Remove the two screws r, and pull out the blank shutter solenoid.

e

qr w

Figure 4-313

4-36 COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)