Canon FY8-13EX-000, NP6218 service manual E004, E007, 10-65

CHAPTER 10 TROUBLESHOOTING

4.	E004
	Cause	Step	Checks	Results	Action
Fixing heater		1	Replace the fixing heater driver	YES	End.
driver PCB			PCB. Is the problem corrected?
DC controller				NO	Replace the DC
PCB					controller PCB.

5.	E007
	Cause	Step	Checks	Results	Action
Fixing film		1	Is the fixing film cut or torn?	YES	Replace the fixing upper
					unit
Fixing film		2	Does the problem occur when the	YES	Adjust the fixing roller
tension roller			fixing film or the upper fixing unit		pressure. (See p. 10-28.)
pressure			has been replaced?
Fixing film		3	Have as many as 200,000 copies	YES	Replace the upper fixing
			been made?		unit.
Fixing film		4	Is the tension spring of the fixing	NO	Correct the spring.
sensor			film detecting lever normal?
			Does it move smoothly?
Fixing film		5	Is the fixing film sensor (PS9)	NO	Check the wiring
sensor (PS9)			normal?		between connectors
					J304 and PS9 on the DC
					controller PCB; if
					normal, replace PS9.
Fixing film		6	Replace the fixing film motor	YES	End.
motor (M4)			(M4).
			Is the problem corrected?
DC controller				NO	Replace the DC
PCB					controller PCB.

COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 10-65