Canon NP6218 Vii. Service Mode, B. Using Service Mode, Activating Service Mode, 10-94, A. Outline

CHAPTER 10 TROUBLESHOOTING

VII. SERVICE MODE

A. Outline

The copier’s service mode may be classified into the following six:

Item	Description
[1]	control display mode
[2]	I/O display mode
[3]	adjustment mode
[4]	operation/inspection mode
[5]	specification mode
[6]	counter mode

Table 10-701

B. Using Service Mode

1. Activating Service Mode

1)Open the front door, and insert the door switch actuator.

•If you want to make checks for I/O display mode or the like while making copies, set the copy mode.

2)Press the service mode switch (SW302) on the DC controller with hex key.

•The copy count indicator indicates [1].

•While service mode is activated, the copy density indicator LED indicates the position of the fixing belt.

•A press on the reset key de-activates service mode.

Figure 10-701

10-94 COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)