Deep cleaning

1.Move Power Switch to CLEAN ( II ) position to activate solution pump and vacuum motor.

2.Press Release Pedal on left side of Lower Chassis with foot.

3.Slowly move cleaner back and forth over carpet surface one time while depressing Trigger. Do not overwet.

4.Repeat motion over same area without depressing Trigger.

5.Repeat Steps 3 and 4 until no more dirt can be removed.

6.Continue to clean entire carpet, working in 3’ x 4’ sections.

7.Empty the Dirty Water Tank Assembly when dirty water reaches the full line.

8.If the machine loses suction and/or motor noise rises in pitch, turn Power Switch to OFF. Check the Dirty Water Tank Assembly and empty the tank if it is full [see WHEN YOU’RE DONE, page 7].

9.If floor nozzle stops spraying, turn Power Switch to OFF and check water and cleaning solution levels. Refill if needed. Never run POWERSTEAMERTM dry.

When you’re done

1.Turn Power Switch to OFF (O) position.

2.Unplug Power Cord from outlet.

3.Remove and empty Clean Water Tank Assembly.

4.Press Release Pedal and tip Handle Assembly back with Handle Assembly.

5.Release Dirty Water Tank Latch Assembly at bottom of Lower Chassis.

6.Carefully lift Dirty Water Tank Assembly from Lower Chassis using Carry Handle Assembly.

7.Carry Tank to a toilet or sink, turn Circular Cap at back of unit counterclockwise to open, and pour to empty.

8.Fill Dirty Water Tank Assembly with clean water. Rinse thoroughly and discard water.

9.Remove Dirty Water Tank Triangle Lid and flush suction opening with clean water. Replace cover. Replace Circular Cap by turning clockwise.

10.Replace Clean Water Tank Assembly on Handle Assembly and secure with side latches.

11.Replace Dirty Water Tank Assembly on Lower Chassis and secure with Clean Water Tank Latch Assembly.

12.See PUTTING IT AWAY on page 11.

Tip:

Deep cleaning stairs and high traffic areas on a regular basis can prolong carpet life.

WARNING: The

Dir ty Water Ta n k A ss embly h olds approximately one gallon of soiled liquid. A special float device in the tank will cause the cleaner to stop removing solution from carpet, and the motor sound to rise in pitch when the Dirty Water Tank Assembly is full. Failure to empty full tank will damage unit.

7

Page 7
Image 7
Bissell 1690, 1695 warranty Deep cleaning, When you’re done, See Putting IT Away on

1695, 1690 specifications

The Bissell 1690 and 1695 models are popular upright carpet cleaners designed to tackle tough stains and thoroughly clean carpets. Combining user-friendly features with advanced cleaning technologies, these models are perfect for homeowners seeking an efficient and powerful cleaning solution.

One of the main features of both the Bissell 1690 and 1695 is their lightweight design, making them easy to maneuver during cleaning tasks. Weighing in at approximately 20 pounds, they can be transported throughout the home with ease, ensuring no corner is left uncleaned. This portability is especially useful for cleaning stairs and other hard-to-reach areas.

These models boast a powerful suction capability, which allows them to extract dirt, pet hair, and stains from deep within carpet fibers. The Bissell 1690 and 1695 also utilize an innovative Dual Action Brush Roll system, employing both a rotating brush and suction to effectively remove debris. This technology enhances the overall cleaning performance, making it more effective than many traditional methods.

Another significant characteristic of the Bissell 1690 and 1695 is their ability to clean various surfaces. While these models are primarily designed for carpets, they can also handle upholstery and even hard floors with the appropriate attachments. This versatility makes them suitable for various cleaning needs around the home.

The water tank capacity is another highlight, with both models featuring separate tanks for clean and dirty water. This design not only improves efficiency during cleaning but also ensures that users are always working with clean water, ultimately leading to better results. Refilling the clean water tank is simple and quick, allowing for uninterrupted cleaning sessions.

Furthermore, these Bissell models come equipped with a heat wave technology that maintains consistent water temperatures throughout the cleaning process. This feature aids in breaking down tough stains and dirt, ensuring maximum effectiveness while reducing cleaning time.

Lastly, both the Bissell 1690 and 1695 models are accompanied by specialized cleaning solutions, optimizing stain removal. Using Bissell's formulated products in conjunction with these machines enhances their performance, catering specifically to different types of stains and messes.

In summary, the Bissell 1690 and 1695 low-profile carpet cleaners offer a combination of power, versatility, and user-friendly design. With their advanced suction capabilities, dual brush rolls, and heat wave technology, they provide a comprehensive cleaning experience making them a reliable choice for maintaining a clean home.