20 electrolux cleaning and maintenance
•Brillo/Ajax pads or steel wool pads
•Chemical oven pads or aerosols
•Rust removers
•Bath/Sink stain removers
Clean the outer and inner door glass us- ing warm soapy water. Should the inner door glass become heavily soiled it is recommended that a cleaning product such as Hob Brite is used. Do not use paint scrapers to remove soilage.
Cleaning materials
Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as they may dull the sur- face finishes. Harsh abrasives should also be avoided.
tinued good performance from the Catalytic liners.
To clean the oven cavity, proceed as fol- lows:
1.Remove the oven accessories, if present (e.g. pans, grids, baking tray, dripping pan, etc.). Do not leave anything inside the oven.
2.Turn the oven function control knob to the fan cooking function 
3.Turn the thermostat control to 250° C.
4.Allow the oven to run empty for approximately 45 minutes.
5.Open a window for ventilation.
This procedure should be repeated with the inner grill cooking function grill 
for approximately 5 minutes.
If the oven cavity is cold, let the oven run for 60 minutes.
Oven Cavity
The enamelled base of the oven cavity is best cleaned whilst the oven is still warm. Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough clean- ing, using a proprietary oven cleaner.
DO NOT attempt to clean catalytic liners.
Care of Catalytic Liners
As cooking produces oil, fats, splashes of food, etc., catalytic enamel destroys them. To aid this process it is a good idea to run the oven for an hour or two per week, without food, to ensure con-
Do not attempt to clean catalytic enamel.
Hints and Tips
•Manual cleaning of the Catalytic liner is not recommended. Damage will oc- cur if soap impregnated steel wool pads, aerosol cleaners and any other abrasives are used.
•Slight discolouration and polishing of the Catalytic surface may occur in time. This does not affect the Catalytic properties in any way.
•Follow the recommendations in “Cooking to reduce soilage”.
