Maintenance/Putting it away
Tip:
SmartMix® Bottle may be stored with concentrate ready for your next cleaning job.
CAUTION:
POWERSTEAMER® PROHEAT™ PLUS uses water and must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.
1.Turn Power and SmartTemp™ switches OFF.
2.Unplug power cord from the outlet and coil around machine cord wrap.
3.Remove and rinse tools in clean, running water, dry and replace in tool caddy.
4.Coil flex hose around storage brackets on tool caddy.
5.Remove
6.Rinse out the
Cap
Rotor
Filter
7.Clean out the Flow Indicator Filter each time it is used to insure best cleaning performance. Unscrew the Flow Indicator Cap, lift out the red Rotor and white Filter. Rinse all three parts in tap water. Replace the Filter and Rotor. Replace the Flow Indicator Cap; turn until snug, do not
8.To remove the Clear Nozzle for cleaning out remaining
dirt and carpet fibers, unscrew the two screws with a
Phillips screwdriver. Rotate the Clear Nozzle up toward the handle and lift out. Wipe machine base with a clean damp cloth. Rinse nozzle in tap water and replace. Catch the two tabs in the notches at the top, then rotate down and replace the screws.
9.Wipe all exterior surfaces with a soft cloth.
10.Store cleaner upright in a protected, dry area.
14
