Warning:
To reduce the risk of fire, electric shock or injury, unplug from outlet before servicing.
Maintenance and care (continued)
Storage
Store in a dry area, at room temperature to avoid freezing.
To replace the powerbrush belt
If the belt should break, to replace:
1.Remove the screw in the belt cover using a Phillips Screwdriver.
2.Remove the broken belt.
3.Replace the new belt over the 2 belt gears.
4.Replace the belt cover door.
Tip:
If you do not have the Brush Cartridge in all the way, the Dual PowerBrushes will not rotate. Firmly push the cartridge in place, while listening for the “snap” to assure proper placement.
1.
Troubleshooting
Cleaner won’t run
Possible causes | Remedies | ||
1. | Power cord not plugged in | 1. | Check electrical plug |
2. | Blown fuse/tripped breaker | 2. | Check/replace fuse or reset breaker. |
3. | C.I.D. needs to be reset | 3. | Reset C.I.D. (page 5). |
Reduced spray or no spray |
|
| |
Possible causes | Remedies | ||
1. | Spray nozzle clogged | 1. | Clean spray nozzle |
2. | Solution tank empty | 2. | Check/refill tank |
3. | Tank not inserted properly | 3. | Make sure tank is inserted properly |
Deep cleaner won't pick up cleaning solution |
|
| |
Possible causes | Remedies |
1.Collection tank is full
2.Collection tank drain plug is loose
w w w . b i s s e l l . c o m
1. | Empty collection tank |
|
2. | Check plug for snug fit |
|
| 8 0 0 . 2 3 7 . 7 6 9 1 | 9 |