Operations
Cleaning (continued)
5.Check the collection tank and empty the tank if it is full (See To empty the collection tank, page 8).
6.If the Spot Lifter PowerBrush stops spraying, turn off the unit and check the cleaning solution level in the solution tank. Refill if needed. Never run the unit without water or cleaning solution.
Spot cleaning upholstery
1.Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your Spot Lifter PowerBrush. If tag is coded with an “S” (with diagonal
2.If manufacturer’s tag is missing or not coded, check with your furniture dealer.
3.If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.
Tip:
You may also spray water and formula, with the manual trigger spray, while the unit is turned on and you are using the dual PowerBrushes then suction to clean.
Tip:
When cleaning a vertical surface (ie: chair back, auto interior, etc.) begin with a completely empty collection tank.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 7 |