Operations
Special tools
Your BISSELL Cleanview cyclonic bagless vacuum is not only a powerful carpet and rug vacuum cleaner, it’s also a ver- satile above floor vacuum cleaner when you select one of the special tools.
1.Raise handle to upright position.
2.Grasp the Quick Reach handle and lift hose wand to separate from suction intake opening.
3.Attach tools by firmly pushing onto vacuum hose or extension wand.
Combination Dusting Brush/Upholstery Tool:
Two types of cleaning tools are included in one attachment; rotate for desired tool.
■Use brush side to dust furniture, blinds, books, lamps, shelves and baseboards.
■Use upholstery side for curtains, draper- ies, cushions and fabrics.
Crevice Tool: Use in tight, narrow spaces.
Extension Wand: Use with desired attach- ment for a longer reach.
TurboBrush tool: (Select models only)
Use rotating brush action for small areas such as stairs and upholstery.
NOTE: Press gently when using the TurboBrush tool to gain maximum cleaning. Too much pressure will cause the brush to stop rotating.
Power cord
When you are done using your BISSELL Cleanview Cyclonic Bagless vacuum, return it to the upright position and store the power cord.
1.Turn power switch OFF.
2.Unplug power cord by grasping the plug (NOT the cord) and disconnect from outlet.
3.Loop power cord around cord wraps on side of vacuum cleaner.
4.Clip molded plug to power cord to secure.
NOTICE:
The floor brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the power- foot tilt forward.
Tip:
Hair, string and small objects can block the vacuum hose or tools. Check them occasionally for obstructions.
CAUTION:
The rotating floor brush continues to rotate while tools are in use. To reduce the risk of injury from mov- ing parts, always move the cleaner with the carrying handle at the back of the cleaner. Always place the vacuum cleaner on the floor with the handle in upright position when using tools. Never place your fingers under the cleaner when it is running. Never place powerfoot on furniture or uneven surfaces. Do not place vacuum cleaner close enough to objects to pull them into rotating brush.
NOTICE:
While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.
7
w w w . b i s s e l l . c o m
