Troubleshooting
Vacuum cleaner won't run.
Possible Causes | Remedies | |
1 Vacuum Cleaner is not plugged in | 1 | Check electrical plug |
|
| Check electrical cord connection on back |
|
| of vacuum |
2 Household fuse/circuit breaker tripped | 2 | Check/replace fuse - Reset breaker |
Vacuum cleaner won't pick up dirt. |
|
|
Possible Causes | Remedies | |
1Dust Bag is full
2Rotating Brush Drive Belt
3Rotating Floor Brush bristles worn
4Rotating Floor Brush Jammed
1Replace with new Bag
2Realign Belt; if broken replace
3Replace Brush
4Remove brush and clean debris from Brush Ends; replace Belt
5 | Air passageway clogged | 5 | See “Cleaning the Dust Tube” from passageway |
6 | Vacuum Tube is clogged | 6 | Clean tube - see instructions on page 8 |
Accumulation of dust inside Cloth Bag
Possible Cause | Remedies | ||
1 | Dust Bag is clogged or dirty | 1 | Replace Dust Bag |
2 | Dust Bag Retainer not closed | 2 | Engage snaps |
3 | Clog at inlet | 3 Shake dust down to bottom of Bag | |
Replacement Parts
WARNING:
To reduce the risk of injury from moving parts and/ or electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical out- let before performing troubleshooting checks.
Item Part No. | Part Name |
132053 Drive Belt
232062 Micro Filtration Bags
332054 Filtrete™ Filter
4G.E.921 Replacement Light Bulb
If suggested solutions for this or any function of the Cleaner do not correct the problem, call:
BISSELL Consumer Services
| |
Monday - Friday | 8 a.m. — 9 p.m. EST |
Saturday | 9 a.m. — 5 p.m. EST |
Or visit our website @ www.bissell.com
Please have your model and part numbers of unit ready.
11
