
Cleaning the Dust Tube
Reconnect the tube with the Powerfoot. It should snap
5. into place.
6.
Plug the Connector Plug back into base of vacuum.
BISSELL Consumer Services
Monday - Friday | 8 a.m. — 9 p.m. EST |
Saturday | 9 a.m. — 5 p.m. EST |
Or visit our Website - www.bissell.com
Replacing the Filter
The 3M Filtrete™ Filter is located in the Powerfoot of your vacuum cleaner. Combined with the Filtrete HEPA Dust Bag, it is designed to promote optimum cleaning efficiency, as well as the removal of dust and allergens. It should be regularly checked, and changed when the filter becomes dirty. If the filter appears excessively dirty, more frequent replacement is recommended.
|
|
| To replace filter, remove the screw with a Phillips head | |
1. | ||||
| screwdriver. | |||
|
|
| Lift out filter frame. | |
| 2. |
| ||
|
|
| ||
|
| Remove filter and empty into trash. | ||
3. |
| |||
|
| Replace with new Filtrete Style 6 filter by 3M. | ||
4. |
| |||
|
|
| Replace filter frame by sliding in the two tabs at the top | |
| 5. |
| of the frame and centering over the screw hole. | |
|
|
| Replace screw. | |
6. |
|
Replacing the Light Bulb
|
| Make sure vacuum cleaner is unplugged. | |
1. | |||
|
| ||
|
| Insert the tip of blade type screwdriver at either of the | |
2. |
| ||
| connector tabs at the bottom of the headlight lens. Pry | ||
|
| gently to remove the lens. | |
|
| Remove old bulb. | |
3. |
| ||
|
| Push new bulb into place. | |
4. |
| ||
5. |
| Reinstall lens. |
W A R N I N G :
To reduce the risk of injury from moving parts turn off vacuum cleaner and disconnect Power Source Plug from electrical outlet.
9