How To Use This Guide
This User’s Guide is designed to help you gain the best performance from your BISSELL® Lightweight Upright Vacuum Cleaner. Inside you will find assembly and operating instructions, safety precautions, and maintenance and troubleshooting instructions. Please read through this Guide thoroughly before assembling and using your vacuum cleaner.
Refer to the Product Diagram in this section to locate and familiarize yourself with its parts and features. This will be helpful in assembling the unit and in finding the proper location of parts when you perform routine maintenance. Additional diagrams are included in the maintenance and troubleshooting sections to simplify those tasks.
How To Assemble
The ProLite is packaged for convenience and requires minimal assembly. The only tool you will need is a Phillips head screwdriver.
Slide the Handle Tube into the Connector, aligning the
1. hole in the Handle Tube with the molded hole at the top of the Connector.
Hold the hex nut in front of the connector in the hex
2. shaped cavity while inserting the screw with your finger from the back. Tighten while placing your finger over the hex cavity to hold the hex nut in place. After a few turns, tighten further with a Phillips head screwdriver. Do not overtighten.
Slide screw through plastic retainer from the inside, and
3. bag. Slide spacer onto screw and line up with hole in Handle Tube. Tighten screw.
Remove screw from filter cover. Remove filter cover.
4. Insert the Connector Plug into the back of the unit at the rear of the
Your vacuum cleaner is now ready to use.
W A R N I N G :
Plastic bags or film can be dangerous. To avoid danger of suffocation, keep away from babies and children.
5
