4.
Maintaining TurboBrush Continued
Reposition the drive belt on the brush roll. Place ends of brush roll in slots on sides as shown. Reposition belt cover and secure with one screw. Reposition faceplate and secure with two screws.
Clearing Clogs
Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs.
1.Unplug cleaner from electrical outlet.
2. | Empty Dirt Container. |
|
3.Check Upper Tank for build up or clogs.
4.Remove the Upper Tank and check the suction inlet for a clog.
5.Grasp the Quick Reach Handle and lift Hose Wand to separate from the suction opening. Check for a clog in the Base, the Wand or the Hose.
6.Release the Twist 'n Snap Hose from the vacuum by turning to the left. Straighten the hose and unclog with a long, narrow object.
7.If the clog persists, follow the instructions for Checking the Rotating Floor Brush on pages
Suction 
Inlet
Hose Wand 
Base
Air Passageway
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
Monday - Friday | 8 a.m. — 10 p.m. ET |
Saturday | 9 a.m. — 8 p.m. ET |
Or write:
BISSELL Canada Corporation
Box 1003
Niagara Falls, ON L2E 6W2
ATTN: Consumer Services
Or visit the BISSELL website — www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
| NOTE: Please keep your original sales receipt. It is your warranty. | 13 |
|
