How To Use Your Vacuum
Handle Positions | 1 |
Press the Handle Release Pedal with your foot to place | 2 | |
your vacuum into one of three cleaning positions. | ||
|
1. Upright- For storage and above floor cleaning with tools.
2. Normal Cleaning- Press Handle Release Pedal once. Use for most household floor cleaning tasks.
3
3. Low Cleaning- With the vacuum in normal cleaning position, press Handle Release Pedal again. Use for reaching under low furniture such as tables, chairs or beds.
Height Adjustment
The Powerfoot/Rotating Floor Brush on your vacuum can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.
1.Place Handle in Upright Position.
2.Turn Height Adjustment knob to desired setting.
Lowest Setting | For bare floors. |
Medium Settings | For short and medium |
| pile carpets. |
Highest Setting | For plush pile carpet. |
3.Place the Handle in the normal cleaning position and the Powerfoot will adjust to the setting chosen.
NOTE: You may also adjust the setting while in the normal cleaning position.
Tip:
Before cleaning under low furniture, check area first for objects that might harm the unit or block the Vacuum Hose.
Tip:
Your vacuum features
a
Transporting Cleaner
1.To move your cleaner from room to room, put the Handle in the upright position, tilt the cleaner back on its rear wheels and push forward.
2.The cleaner can also be moved by using the Carrying Handle.
Carrying 
Handle
7
