Operations

Upright cleaning mode continued

Cleaning continued

 

 

 

 

 

 

3.

forward and backward pass over the same

 

CAUTION:

 

Release the trigger and make one slow

 

 

 

 

area. Repeated passes will help aid in dry

 

Do not overwet. Take care not

 

 

 

to run over loose objects or

 

 

time.

 

 

 

 

edges of area rugs. Stalling

 

4.

Continue passes until cleaning area is

 

 

 

brush may result in premature

 

 

complete.

 

 

 

 

belt failure.

 

 

Note: Your machine may be equipped

 

 

 

 

 

 

 

with a circuit breaker that will auto-

 

 

 

 

matically shut off the brush if a large

Tip:

 

or loose object is caught in the brush

 

roll. If that happens, be sure to unplug

 

your machine, remove the foreign

Make only one trip to the sink

 

object, and then plug the machine

by removing the entire por-

 

back in to reset the circuit breaker.

table cleaner. Fill and empty

Empty dirty tank

in the same trip.

1.When the dirty tank reaches the “FULL” line on the tank it is time to empty.

2.Remove dirty tank and carry to a utility

sink, toilet or outside (where you will

2.

3.

4.

dispose of the dirty water).

 

 

 

3.To unlock the dirty tank lid, rotate han- dle over the back of the tank. Remove lid and pour out dirty water. Rinse out dirty tank to remove any debris.

4.Replace top of tank, and rotate the handle forward to lock in place on front of tank.

Cleaning your machine

1.Flush out machine of any remaining residual solution.

Fill the formula & water tank with hot tap water and turn on your machine.

Recline handle and press the spray trig- ger for about 15 seconds while making forward and backward passes on car- pet. Continue without pressing the trig- ger until there is no more water being suctioned up.

Turn off the machine and wrap the pow- ercord. Make sure the dirty tank and the formula & water tank are emptied, rinsed, and dried before the next use.

Before you replace tank, clean all debris from red filter screen.

WARNING:

To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

Tip:

For best results empty, rinse and dry both tanks before storing.

9

w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Page 9
Image 9
Bissell 94Y2, 35K3, 27F6, 73H5 Empty dirty tank, Cleaning your machine, Release the trigger and make one slow, Complete