Operations
Upright cleaning mode continued
Cleaning your machine continued
2.Rinse front nozzle of any dirt and debris.
Remove portable spot cleaner from the base of the machine.
Unscrew three screws with Phillips screw driver and remove nozzle.
Rinse nozzle out at the faucet.
Place back onto the machine by hooking the tabs into the holes on the bottom sides of the machine. Secure with screws.
3.The inside of the end caps can be wiped out with a clean paper towel, or for a more thorough clean, the end caps can be taken off and rinsed clean.
4.Any loose hair or debris can be pulled from the brush rolls and thrown away. For a more thorough clean, follow directions on page 15 for removal of brush rolls. Your machine is now ready to be stored.
Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.
WARNING:
To reduce the risk of fire, elec- tric shock or injury unplug from outlet before servicing.
2.
Tip:
Let all parts dry completely and replace onto machine.
10 w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
