Bissell 3750 How To Use This Guide, How To Put It Together, Attach Handle To Vacuum, and children

Stand the vacuum upright and slide the base of the Handle firmly into the grooves at the top of the vacuum body.

ug603-5539_3750E_304 6/25/04 2:08 PM Page 5

How To Use This Guide

This User’s Guide has been designed to help you get the most sat- isfaction from your BISSELL Lift-Off. You’ll find assembly and oper- ating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this User’s Guide thor- oughly before assembling your vacuum cleaner.

Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they fit. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL Lift-Off for many years.

How To Put It Together

The only tool you’ll need to assemble your vacuum cleaner is a screwdriver.

Attach Handle To Vacuum

Locate the vacuum Handle and remove the screw packet

1. taped to the base of the Handle.

2.

Check to be sure the Handle is fitted to the vacuum

3. body. If there is a gap in front, continue to push firmly until the Handle is flush.

Insert two of the screws from the screw packet into the

4. existing holes. Tighten securely with a screwdriver.

Attach Vacuum Hose and Tools

Position the Hose Assembly on the back of the Cylinder

1. as shown.

Attach the Hose with the remaining two screws from the

2. packet. Tighten securely with a screwdriver.

WARNING:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies

and children.

5