Bissell 3760 warranty Clean Filter Indicator, Release Button

Special Tools Continued

TurboBrush™ (Select Models):

Use rotating brush action for small areas such as stairs and upholstery.

Note: Press gently when using TurboBrush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating.

Deluxe Bare Floor Tool (Select Models):

Use for bare floors. Swivel head turns to get into tight spaces and fits under cabinets.

Note: The Deluxe Bare Floor Tool does not store on board.

All items may not be included with your model. More tools are available; to order please refer to page 15.

Cleaning With The Detachable Cylinder

The Detachable Cylinder feature makes it possible to easily take the powerful cleaning action of your BISSELL Lift-Off Spinpower to stairways, auto interiors, and other hard-to-reach areas of your home.

Before detaching the Cylinder, your vacuum must be in its fully Upright Position. You do not need to turn off the power first.

1.Press the Release Button at the top of the Cylinder Handle and lift the Cylinder to remove.

2.Detach the Vacuum Hose from the Hose Grip Base at the back of the Cylinder.

3.Attach the desired tool(s) to the Hose Grip at the end of the Vacuum Hose.

4.When you’re done, remove the tool(s) and reconnect the Hose to the Hose Grip Base.

5.Return the Cylinder to the Powerfoot by aligning the “feet” on the front with the bumps on the foot of the upright vacuum. Push the Cylinder toward the vacuum frame until it “clicks” into place.

Clean Filter Indicator

Select Models Only

The Clean Filter Indicator tells you when airflow in the vacuum is reduced due to dirty Filters or a clog in the hose. The Clean Filter Indicator will remain green until the airflow is reduced. At that time, it begins to change to red. When it is fully red, the airflow is significantly reduced or blocked. Follow the steps on pages 10 -11 to clean your Filters. All Filters in the vacuum should be cleaned or replaced when the Clean Filter Indicator turns red.

If the indicator remains red after all Filters have been cleaned, follow the steps on page 13 to

8check for and clear clogs.

ug603-5570_3760E_1105.indd 8

Release

Button

NOTICE:

While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.

2/2/06 4:12:15 PM