Troubleshooting Continued
Tools won't pick up dirt, continued
Possible Cause | Remedies |
3Dirt Container full
4Dirt Container or Upper Tank not installed properly
5Filters are dirty
3Empty Dirt Container
4Position correctly and lock in place
5Check and clean Inner and Outer Circular Filters,
6 Louver missing or installed incorrectly | 6 Check for a clog in the tube in the |
| center of the Dirt Container, clear |
| and properly install Louvers |
Vacuum cleaner is difficult to push
Possible Causes | Remedies | ||
1 | Incorrect Height Adjustment | 1 | Adjust Powerfoot to correct |
|
|
| height setting |
2 | Brush Cover installed incorrectly | 2 | Make sure all three latches |
|
|
| are secured |
Visible dirt escaping from cleaner
Possible Causes | Remedies | ||
1 | Dirt Container full | 1 | Empty Dirt Container |
2 | Filters missing or installed incorrectly | 2 | Check Inner and Outer Circular |
|
|
| Filters and |
|
|
| correct installation |
3 | Dirt Container installed incorrectly | 3 | Pull out and |
|
|
| Container correctly |
4 | Filter Cup installed incorrectly | 4 | Remove Dirt Container and make |
|
|
| sure Filter Cup is fully attached |
If suggested solutions do not correct the problem, call:
BISSELL Consumer Services
Monday - Friday | 8 a.m. — 10 p.m. ET |
Saturday | 9 a.m. — 8 p.m. ET |
or visit the BISSELL website - www.bissell.com
13