Operations
Upright cleaning mode continued
Cleaning continued |
|
|
| |
|
|
| ||
| CAUTION: |
| ||
3. Release the trigger and make one slow |
|
| ||
forward and backward pass over the |
|
| ||
same area. Repeated passes will help |
| Do not overwet. Take care not |
| |
aid in dry time. |
| to run over loose objects or |
| |
4. Continue passes until cleaning area |
| edges of area rugs. Stalling |
| |
| brush may result in premature |
| ||
is complete. |
|
| ||
| belt failure. |
| ||
Note: Your machine may be |
|
| ||
|
|
| ||
equipped with a circuit breaker that |
|
|
|
|
will automatically shut off the brush |
| Tip: |
| |
if a large or loose object is caught |
|
| ||
in the brush roll. If that happens, |
|
| ||
be sure to unplug your machine, |
| Make only one trip to the sink by |
| |
remove the foreign object and then |
|
| ||
| removing the entire portable cleaner. |
| ||
plug the machine back in to reset the |
|
| ||
| Fill and empty in the same trip. |
| ||
circuit breaker. |
|
| ||
|
|
|
| |
Empty dirty tank |
|
|
|
|
|
|
|
| |
1.When the dirty tank reaches the “FULL” line on the tank, it is time to empty.
2.Remove the dirty tank and carry it to a utility sink, toilet or outside (where you will dispose of the dirty water).
3.To unlock the dirty tank lid, rotate the handle over the back of the tank. Remove lid and pour out dirty water. Rinse out the dirty tank to remove any debris.
4.Replace the top of the tank and rotate the handle forward to lock in place on front of tank.
5.Before replacing the tank on the machine, wipe debris from red filter
Cleaning your machine
1.Flush out machine of any remaining residual solution.
1a. Fill the formula & water tank with hot tap water and turn on your machine.
1b. Recline handle and press the spray trigger for about 15 seconds while making forward and backward passes on carpet. Continue without pressing the trigger until there is no more water being suctioned up.
1c. Turn off the machine and wrap the powercord. Make sure the dirty tank and the formula & water tank are emptied, rinsed, and dried before the next use.
1d. Before you replace tank, clean all debris from red filter screen.
2.3. 
4.
5.
WARNING:
To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.
Tip:
For best results, empty, rinse, and dry both tanks before storing.
9
w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
