Troubleshooting
Vacuum won’t turn on
Possible cause
1.Power cord not plugged in
2.Blown fuse/tripped breaker
WARNING:
To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.
Remedies
1.Check electrical plug
2.Check fuse or reset breaker
Vacuum won’t pick up debris or low suction
Possible cause | Remedies | ||
1. | Crack or hole in hose | 1. | Check hose and replace if needed |
2. | Hose is loose | 2. | Make sure both ends of hose are fully inserted |
3. | Foot is loose | 3. | Make sure foot is fully inserted into body |
|
|
| of unit |
4. | 4. | Check and clean or replace | |
5. | Dirt container is full of debris | 5. | Empty dirt container |
6. | Separator grill is clogged with debris | 6. | Wipe separator grill of all debris |
7. | Dirt container or separator grill not installed properly | 7. | Position correctly and lock in place |
8. | Clog in vacuum | 8. | Follow instructions on page 8 for |
|
|
| clearing clogs |
Visible dirt escaping from cleaner |
|
| |
Possible cause | Remedies | ||
1. | Dirt container is full of debris | 1. | Empty dirt container |
2. | 2. | Check | |
3. | Dirt container installed incorrectly | 3. | Pull out and |
4. | Separator grill missing or not installed | 4. | Check separator grill to ensure proper |
|
|
| installation |
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 | 9 |
6/18/08 3:44:02 PM