Scotchgard™ protector Applicator (Optional)
The Scotchgard protector applicator (with formula included) can be used to help retain the carpet cleanliness you achieve with your ProHeat machine. For best results the post cleaning treatment should be applied while the carpet is still wet or damp. It is recommended that the Scotchgard protector is applied every 12 months in all carpeted areas, and after every deep cleaning for high traffic areas such as entryways and stairs.
Immediately after cleaning and rinsing your carpets, empty the
1.
2.
Flush water through the hose to eliminate cleaning solution
3. from the tube by spraying water through the hose without attachments into a sink for
Attach cartridge to the applicator tool, following instructions
4. on cartridge.
5.
Place the Scotchgard protector applicator onto the end of the Flex
6. Hose. The water from the
Before applying Scotchgard protector, test a small, hidden area
7. for colorfastness. Examine area when dry. If color is affected, do not use. For upholstery, look for manufacturer’s cleanability code tag. Use on fabrics coded “W” or “WS”. If coded “S” or “X” do not use. Not recommended for use on velvet, silk vinyl, leather or 100% cotton upholstery.
Plan your route to leave an exit path. It is best to begin
8. protecting in the corner farthest from your exit.
Apply Scotchgard protector in a slow sweeping motion with a
9. slight overlap of the treated area. For best coverage, follow the guide on the cartridge.
One 8 oz. cartridge protects 200 square feet (18.6 square
10. meters). This is equal to two average size rooms (each at 10 x 10 feet or 3 x 3 meters). Periodically check the product level in the bottle to ensure best coverage.
Be careful not to spray the protector onto furniture or fabric
11. that has not been tested for colorfastness. If this does occur, wipe off the protector.
Remove bottle from applicator tool. If concentrate is left, put
12. the cap on and store at room temperature for later use.
With applicator tool still on the end of Flex Hose, spray clean
13. hot water into sink to avoid any future clogging.
14. Store tool on the back of unit in the caddy.
Tip:
If clogged, soak applicator tool in hot tap water before using.
14