Normal Cleaning, Maintenance/Storage, Pump Belt Replacement

Make one slow forward and backward wet pass by pushing the SprayTrigger. Caution: Do not overwet.

Normal Cleaning

Plug the PowerSteamer into a proper outlet and turn ON

1. the Power Switch.

Release the Spray Trigger and make one slow forward

3. and back pass over the same area to remove any resid- ual dirty water.

Repeat cleaning passes without pressing the Spray Trigger

4. until you can’t see any more water being suctioned up.

When cleaning job is complete, refer to

5. Maintenance/Storage.

1. Turn Power Switch OFF.

Unplug Power Cord from outlet and coil cord around

2. Power Cord Quick Release.

Power Cord Quick Release

Remove Tank-in-Tank. Dispose of dirty water.

Rinse out Tank-in-Tank and re-seat the tank

4. onto the machine.

Wipe all exterior surfaces with a soft cloth.

Store cleaner in a protected, dry area.

When carpet is dry, vacuum again to remove hair and

CAUTION:

PowerSteamer uses water and must not be stored where there is a danger of freezing. Freezing will damage internal components

7. fuzz that the PowerSteamer may have loosened.

Step on Handle Release pedal and recline Handle on

1. floor (see illustration).

Remove the Tank-in-Tank. Set aside (see illustration).