BIXOLON SRP-770II user manual Interface Cable Connection, Usb

SRP-770II

3-2 Interface Cable Connection

Connect the interface cable as shown below.

This printer supports the following communications interface standards.

-RS-232C (Serial)

-IEEE1284 (Parallel)

-USB

USB Cable	RS-232 (Serial) Cable
	IEEE1284 (Parallel) Cable

1)Turn off the power switch.

2)Connect the interface cable to the printer interface connector.

-For a Serial cable, secure by tightening the screws on both sides.

-For a Parallel cable, secure by fastening the clips on both sides.

Rev. 1.14 - 11 -