BIXOLON SRP-770II user manual Peel-Off

SRP-770II

5-5 The Peel-Off

This function is used to automatically separate labels from the liner.

-The peeler is for Label Paper only.

-When the peeler switch is on, labels are not printed if previous printed labels have been removed from the peeler.

-When the peeler function is not required, turn the peeler switch off. Keeping the switch on may result in the printer not working correctly.

-When the peeler switch has been changed, the printer should be turned off and back on.

1)Open the peel-off cover and turn on the peeler switch. (Check if the peeler LED is on.)

P
E
E
	L
	E
O	R
F
F O
	N

LED

2)Remove the paper and insert the paper through the slot. Remove

Rev. 1.14 - 19 -