BIXOLON SRP-770II user manual Pause/Restart

SRP-770II

[Table 1] Dip Switch 1

	No	Functions					Details
	1-1	Speed Selection	Off				4.0 ips
			On				5.0 ips
			4	3		2	Density
	1-2		Off	Off		Off	13
			Off	Off		On	14
	1-3	Density Selection	Off	On		Off	15
			Off	On		On	16
	1-4		On	Off		Off	17
			On	Off		On	18
			On	On		Off	19
			On	On		On	20
	1-5	Exhibition Selection	Off	Normal	Mode
			On	Demo Mode
	1-6	Media Selection	Off	Label Paper
			On	Thermal Continuous Paper
	1-7	Auto Cutter	Off	Without Auto Cuter
			On	With Auto Cuter
	1-8	Back Feed Option	Off	Back Feeding Enable
			On	Back Feeding Disable
[Table 2] Dip Switch 2
	No	Functions					Details
	2-1		2	1			Baud Rate
		Baud Rate Selection	Off	Off			9,600 bps
	2-2		Off	On			19,200 bps
			On	Off			230,400 bps
			On	On			115,200 bps
	2-3	Media Detection	Off	Detect	Gap
			On	Detect Black-mark
	2-4	Reserved				Default --- off
	2-5	Reserved				Default --- off
	2-6	Reserved				Default --- off
	2-7	Paper End Sensor	Off	Enable
		Status	On	Disable
	2-8	Reserved				Default --- off

5-2 Pause/Restart

Press FEED button to pause at the middle of labels printing.

1)Press FEED once.

2)Printer stops after on-going printing and Red LED becomes on.

3)Press FEED once again. It restarts printing in a queue.

Rev. 1.14 - 16 -