Manuals / Black & Decker / Power Tools / Power Screwdriver

Black & Decker 4025, 386312-02 Dead Spindle Action, Accessory Assembly, Depth Sensitive Units

Models: 4060 4063SD 4063 386312-02 4025

1 22
Download 22 pages 1.18 Kb
Page 7
Image 7

GRB/386312-02 8/11/00 1:56 PM Page 3

To lock the switch in the on position for continuous operation, depress the trigger switch and push up the locking button. The tool will continue to run. To turn the tool off, from a locked on condition, squeeze and release the trigger once. Before using the tool (each time), be sure that the locking button release mechanism is working freely. Be sure to release the locking mechanism before disconnecting the plug from the power supply. Failure to do so will cause the tool to start immediately the next time it is plugged in. Damage or injury could result.The reversing lever is used to reverse the tool for backing out screws. It is located above the trigger, shown in Figure 1. To reverse the screwdriver, turn it off and push the reversing lever to the right (when viewed from the back of the tool). To position the lever for forward operation, turn the tool off and push the lever to the left.

Dead Spindle Action

All GRABBER screwdrivers provide a dead output spindle to permit fasteners to be located easily in the driving accessory. Clutches are held apart by light spring pressure permitting the driving clutch to rotate without turning the driven clutch and accessory. When sufficient forward pressure is applied to the unit, the clutches engage and rotate the spindle and accessories. A reversing switch makes it possible to drive or loosen either right or left hand screws.

Accessory Assembly

The 1/4" hex drive ball lock chuck is used on all depth sensitive and drywall screwdrivers. Assemble accessories by engaging the hex spindle and tapping lightly on the accessory until it snaps in place. Usually pliers are required to remove the accessory by pulling forward.

Depth Sensitive Units

TO CHANGE BIT HOLDERS:

1.Pull forward on adjustment collar and remove from clutch housing.

2.Pull bit holder straight out with pliers if it is difficult to remove.

3.Push new bit holder into spindle until ball lock snaps in groove in bit holder shank.

4.Replace adjustment collar by snapping over retaining ring. NOTE: Align ribs on inside of depth locator with grooves in clutch housing before snapping into place.

CHANGING BIT TIP

1.Pull forward on adjustment collar and remove it from clutch housing (see Figure 3).

2.Use pliers to remove worn bit and install new bit tip.

DEPTH ADJUSTMENT:

Follow the graphic on the collar to increase or decrease the fastening depth. To seat the screw deeper in the workpiece, turn the adjustment collar to the right. To seat the screw higher in the workpiece, turn the adjustment collar to the left.

INSTALLING AND CHANGING NUTSETTERS AND LOCATORS Depth Sensitive Units for Drill Point Screws

1.To change or install a new nutsetter:

a)Pull forward on adjustment collar and remove from clutch housing.

b)Pull nutsetters straight out with pliers

c)Select nutsetter size desired.

d)Two locators are supplied, a 9/16" ID for 3/8" nutsetters and 1/2" ID for 5/16" nutsetters. Match locator to desired size nutsetter or bit holder.

2.Place nutsetter into clutch housing and push end of nutsetter until ball lock snaps into groove of nutsetter shank.

3.Reassemble adjustment collar by snapping over springs (see Figure 4).

NOTE: Align ribs on inside of depth locator with grooves in clutch housing.

English

3

Page 6 Page 8
Page 7
Image 7
Black & Decker 4025, 386312-02, 4060, 4063SD manual Dead Spindle Action, Accessory Assembly, Depth Sensitive Units
Page 6 Page 8

4060, 4063SD, 4063, 386312-02, 4025 specifications

Black & Decker is a renowned brand known for its innovative power tools and home improvement solutions. Among its widely recognized products are the 4025, 386312-02, 4063, 4063SD, and 4060 models, each offering unique features and technologies that cater to various user needs.

The Black & Decker 4025 is a versatile tool ideal for a variety of home projects. This model features a powerful motor designed for efficiency, making it suitable for performance-driven tasks. Its lightweight design allows for ease of maneuverability, and the ergonomic grip enhances user comfort during extended use. Additionally, the variable speed settings provide precise control, allowing users to adapt to different materials and applications seamlessly.

The 386312-02 model stands out with its exceptional durability and robust construction. Built to withstand tough conditions, this tool is perfect for heavy-duty tasks. It incorporates advanced safety features that minimize the risk of accidents, such as an automatic shut-off mechanism and a safety lock. This model also benefits from innovative battery technology that ensures longer use time and quick recharge capabilities.

Moving to the Black & Decker 4063, this tool is designed for versatility and performance. It features a powerful engine that delivers consistent power across various applications. The 4063 is equipped with a user-friendly interface, making it accessible for both seasoned professionals and DIY enthusiasts. Additionally, its compact design allows for easy storage and transport, ensuring that it's always ready for the next project.

The 4063SD model takes user convenience to the next level with its built-in dust collection system, which helps maintain a clean workspace. This feature is particularly useful for projects that generate debris, providing a safer and more enjoyable working environment. The 4063SD also offers multiple attachments, making it adaptable for different tasks, from sanding to polishing.

Lastly, the Black & Decker 4060 model boasts an impressive range of features designed for efficiency and effectiveness. It includes a high-capacity battery that supports extended operation, reducing downtime during critical tasks. The tool's advanced vibration reduction technology enhances user comfort, allowing for longer periods of use without strain.

In summary, Black & Decker's 4025, 386312-02, 4063, 4063SD, and 4060 models are exemplary tools that embody the brand's commitment to quality and innovation. With their powerful performance, user-friendly designs, and advanced safety features, they cater to a diverse range of applications and ensure that every project is completed with precision and ease. Whether you are a professional contractor or a home improvement enthusiast, these tools offer the reliability and versatility needed to achieve optimal results.