Black & Decker 5500 manuel dutilisation Use and Care Assembly

ASSEMBLY

Use and Care (Assembly)

To use your Blender Solution™ 5000, begin by assembling the glass mixing jar.

Lid

Clear Lid Cover

Glass Mixing Jar

Rubber Gasket

Blender Blade Base

1.Position the rubber gasket down onto the circular flat surface in the plastic blender or smoothie blade base.

2.Place the bottom threaded section of the glass mixing jar down into the plastic blade base. Engage threads by twisting the blade base clockwise until tight- ened onto the jar. Make sure that the blade base is tightly fastened to the jar and that the rubber gasket is properly compressed between the jar and the plastic blade base.

3.Push the lid onto the top of the mixing jar. Place the clear lid cap in the center of the lid or place the stir stick through the center of the lid.

4.Place the mixing jar onto the motor base so that the bottom of the blade base is sitting flat on the motor base.

5.Plug in the cord. Your Blender Solution™ 5000 is now ready to use!

8

5000Manual*.indd 8

10/13/06 9:18:31 AM