90504614 SC1400 Lith Ion drill 6/19/06 9:49 AM Page 8

Keyless Chuck - Figure E

E

To insert a drill bit or other accessory:

• Loosen the chuck (1) by rotating it counterclockwise.1

• Insert the bit or other accessory fully into the chuck, and tighten securely by rotating in the clockwise direction as

viewed from the chuck end.

WARNING: To prevent personal injury, do not attempt to tighten drill bits (or any other accessory) by gripping the front part of the chuck and turning the tool on. Damage to

the chuck and personal injury may occur when changing accessories.

Battery Level Indicator - Figure F

F

A battery charge indicator (6) is built into the drill.

 

• To display the charge status, press the black button at the

 

bottom of the indicator.

6

• When fully charged batteries are installed, all three lights

 

will be illuminated. As the charge is depleted, there will be less lights illuminated.

Screw Driving

For driving fasteners, the reversing button (4) should be

pushed to the left. Use reverse (button pushed to the right) for removing fasteners. When moving from forward to reverse, or vice versa, always release the trigger switch

(3) first.

Drilling

•Use sharp drill bits only.

•Support and secure work properly, as instructed in the Safety Instructions.

•Use appropriate and required safety equipment, as instructed in the Safety Instructions.

•Secure and maintain work area, as instructed in the Safety Instructions.

•Run the drill very slowly, using light pressure, until the hole is started enough to keep the drill bit from slipping out of it.

•Apply pressure in a straight line with the bit. Use enough pressure to keep the bit biting but not so much as to stall the motor or deflect the bit.

•Hold the drill firmly with one hand on the grip and the other hand on the bottom of the battery pack to control its twisting action.

•Under heavy loads the drill may cut out as a safety precaution. If this happens, release the trigger switch and squeeze it again to start the drill.

•DO NOT CLICK THE TRIGGER OF A STALLED DRILL OFF AND ON IN AN ATTEMPT TO START IT. DAMAGE TO THE DRILL CAN RESULT.

•Minimize stalling on breakthrough by reducing pressure and slowly drilling through the last part of the hole.

•Keep the motor running while pulling the bit out of a drilled hole. This will help reduce jamming.

•Make sure switch turns drill on and off.

WARNING: Hold the drill firmly with one hand on the grip and the other hand on the bottom to control its twisting action.

WARNING: Drill may stall (if overloaded or improperly used) causing a twist. Always expect the stall. Grip the drill firmly with both hands to control the twisting action and prevent loss of control which could cause personal injury. If a stall does occur, release the trigger immediately and determine the reason for the stall before re-starting.

Drilling in Wood

Holes in wood can be made with the same twist drill bits used for metal or with spade bits. These bits should be sharp and should be pulled out frequently when drilling to clear chips from the flutes.

NOTE: Under heavy loads the drill may cut out as a safety precaution. If this happens, release the trigger switch and squeeze it again to start the drill.

8

Page 7 Page 9
Page 8
Image 8
Black & Decker 90504614 instruction manual Battery Level Indicator Figure F, Screw Driving, Drilling in Wood
Page 7 Page 9

90504614 specifications

The Black & Decker 90504614 is a high-performing power tool accessory designed to enhance the efficiency and precision of your woodworking and construction projects. This product features a range of attributes that make it a reliable choice for both professionals and DIY enthusiasts alike.

One of the standout features of the 90504614 is its exceptional durability. Constructed with premium materials, it is engineered to withstand heavy usage and resist wear and tear. This durability ensures that users can rely on the tool for a long duration without experiencing significant degradation in performance. The rugged design is complemented by its lightweight build, making it easy to handle and maneuver, even in tight spaces.

Another characteristic that sets the Black & Decker 90504614 apart is its user-friendly design. It is compatible with a variety of Black & Decker power tools, allowing for seamless integration into your existing toolkit. This versatility means that you can easily switch between different tasks without needing to invest in multiple accessories. This adaptability is particularly beneficial for users who frequently tackle a wide range of projects.

Technologically, the 90504614 incorporates advanced engineering that enhances its cutting precision. Its sharp, high-strength blades are designed to provide clean cuts, reducing the need for post-processing and improving overall workflow. The tool is also equipped with features that minimize vibration, allowing for steadier operation and increased accuracy during use. This is particularly valuable for intricate tasks that demand high levels of concentration and finesse.

Moreover, safety is a paramount concern in power tool design, and the Black & Decker 90504614 delivers in this aspect too. It includes built-in safety features that help prevent accidents, making it suitable for users of varying skill levels. This focus on safety not only protects the user but also extends the lifespan of the tool itself.

In conclusion, the Black & Decker 90504614 is an impressive accessory that combines durability, versatility, cutting precision, and safety. Its thoughtful engineering makes it an excellent choice for anyone looking to enhance their toolkit with a reliable and efficient power tool accessory. Whether tackling home improvement projects or professional builds, the 90504614 is sure to meet and exceed user expectations.
Top Page Image Contents