90504614 SC1400 Lith Ion drill 6/19/06 9:49 AM Page 6

6.Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

7.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire, electric shock or electrocution.

a.Two-wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed extension cords should be used, and we recommend that they be listed by Underwriters Laboratories (U.L.). If the extension is to be used outside, the cord must be suitable for outdoor use. Any cord marked for outdoor use can also be used for indoor work. The letters "W" or "WA" on the cord jacket indicate that the cord is suitable for outdoor use.

b.An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety, and to prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each extension contains at least the minimum wire size.

8.Use only the supplied charger when charging your tool. The use of any other charger could damage the tool or create a hazardous condition.

9.Use only one charger when charging.

10.Do not attempt to open the charger. There are no customer serviceable parts inside. Return to any authorized Black & Decker service center.

11.DO NOT incinerate the tool or batteries even if they are severely damaged or completely worn out. The batteries can explode in a fire.

12.Do not incinerate the battery even if it is severely damaged or is completely

worn out. The batteries can explode in a fire. Toxic fumes and materials are created when lithium ion batteries are burned.

13.Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the drill from the charger may ignite the dust or fumes.

14.If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for three minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.

Charging Procedure

THE BATTERIES IN YOUR TOOLARE NOT FULLY CHARGED AT THE FACTORY.

BEFORE ATTEMPTING TO CHARGE THEM, THOROUGHLY READ ALL OF THE SAFETY INSTRUCTIONS.

To charge your tool, follow the steps below.

1.Plug the charger into any standard 120 Volt 60 Hz electrical outlet.

2.Place the tool into the cradle as shown in figure A making sure to match the charging contacts on the back of the tool with the contacts in the charger. The red (charging) light will illuminate indicating that the charging process has started.

3.Let the tool charge initially for 9 hours. After the initial

A

charge, under normal usage, your tool should be fully charged in 3 to 9 hours.

Important Charging Notes

1.After normal usage, your tool should be fully charged in 3 to 9 hours. Your tool was sent from the factory in an uncharged condition. Before attempting to use it, it must be charged for at least 9 hours.

2.DO NOT charge the batteries in an air temperature below 40°F (4,5 °C) or above 105°F (+40,5 °C). This is important and will prevent serious damage to the batteries. Longest life and best performance can be obtained if batteries are charged when air temperature is about 75°F.

6

Page 5 Page 7
Page 6
Image 6
Black & Decker 90504614 instruction manual Charging Procedure, Important Charging Notes
Page 5 Page 7

90504614 specifications

The Black & Decker 90504614 is a high-performing power tool accessory designed to enhance the efficiency and precision of your woodworking and construction projects. This product features a range of attributes that make it a reliable choice for both professionals and DIY enthusiasts alike.

One of the standout features of the 90504614 is its exceptional durability. Constructed with premium materials, it is engineered to withstand heavy usage and resist wear and tear. This durability ensures that users can rely on the tool for a long duration without experiencing significant degradation in performance. The rugged design is complemented by its lightweight build, making it easy to handle and maneuver, even in tight spaces.

Another characteristic that sets the Black & Decker 90504614 apart is its user-friendly design. It is compatible with a variety of Black & Decker power tools, allowing for seamless integration into your existing toolkit. This versatility means that you can easily switch between different tasks without needing to invest in multiple accessories. This adaptability is particularly beneficial for users who frequently tackle a wide range of projects.

Technologically, the 90504614 incorporates advanced engineering that enhances its cutting precision. Its sharp, high-strength blades are designed to provide clean cuts, reducing the need for post-processing and improving overall workflow. The tool is also equipped with features that minimize vibration, allowing for steadier operation and increased accuracy during use. This is particularly valuable for intricate tasks that demand high levels of concentration and finesse.

Moreover, safety is a paramount concern in power tool design, and the Black & Decker 90504614 delivers in this aspect too. It includes built-in safety features that help prevent accidents, making it suitable for users of varying skill levels. This focus on safety not only protects the user but also extends the lifespan of the tool itself.

In conclusion, the Black & Decker 90504614 is an impressive accessory that combines durability, versatility, cutting precision, and safety. Its thoughtful engineering makes it an excellent choice for anyone looking to enhance their toolkit with a reliable and efficient power tool accessory. Whether tackling home improvement projects or professional builds, the 90504614 is sure to meet and exceed user expectations.
Top Page Image Contents