SL102B_ManualEN_051007.qxp 5/10/07 9:13 AM Page 3
•Position charging adapter cords so they do not become entangled or become a safety hazard. Keep charging adapter cords away from sharp edges.
•Use in a dry location only.
•Do not open body casing. There are no
•To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting from the 120 Volt AC Charger.
•Do not attempt to charge the unit if the 120 Volt AC Charger plug is damaged— return the unit to manufacturer for repair.
INTRODUCTION
Thank you for choosing the Black & Decker®
FEATURES
•Powerful, focused quartz halogen beam
•Protective rubber safety guard (bezel) around lens
•Rubber safety cap protects battery compartment
•Comfortable pistol grip
•Battery Status LED Indicator
•UL listed,
•12 volt DC charging adapter included
•Rechargeable,
RUBBER BEZEL | BATTERY STATUS LED |
| INDICATOR |
120 VOLT AC CHARGER (BACK OF UNIT)
QUARTZ HALOGEN BULB
DC CHARGING |
|
|
PORT | TRIGGER ON/OFF | TRIGGER LOCK |
|
| PISTOL GRIP HANDLE |
CHARGING/RECHARGING THE SPOTLIGHT
This unit is shipped in a partially charged state. Charge unit BEFORE first use using the 120 Volt AC Charger for
Charging/Recharging Using the 120 Volt AC Charger and a Standard Household Extension Cord (not included)
Plug a standard North American 120 volt AC extension cord (not included) into the 120 Volt AC Charger on the back of the unit.
BATTERY STATUS LED
INDICATOR
BUILT-IN 120V AC
CHARGER
Make sure the Spotlight is OFF (the Trigger Lock is in the OFF position and the Trigger is not depressed).
3
