Intended Use

Detail Sanding

Sanding in extremely tight areas otherwise difficult to reach and require hand sanding. Select a high oscillating frequency. Sand with continuous motion and light pressure. Applying excessive pressure does not increase material removal; but will prematurely wear sanding sheets.

Flush Cutting

Remove excess wood from door jamb, window sill and/or toe kick. Removing excess copper or PVC pipe.

Removal Work

Carpets & backing, old tile adhesives, caulking on masonry, wood and other surfaces.

Removal of Excess Materials

Tile grout, plaster, mortar splatters, concrete on tiles, sills.

Preparation of Surfaces

New floors and tiles.

SAVE THESE INSTRUCTIONS

Functional Description

BD200MT Only

A) On/Off switch

G) Tool-free release

B) Variable speed dial

H) Adaptor plate

C) Power cord

I)

Press board

D) Clamp washer

J)

O-ring

E) Bolt

 

 

F) Hex wrench

 

 

BD200TMT

A

B

 

C

D E F

BD200MTB

A

C

H I J G

Assembly (BD200TMT)

WARNING: Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

WARNING: Risk of lacerations or burns. Do not touch workpiece or blade immediately after operating the tool. They can become very hot. Handle carefully. Always allow workpiece and accessories to cool before handling.

6

Page 6
Image 6
Black & Decker BD200MTBR, BD200MT TYPE 2 instruction manual Intended Use, Functional Description, Assembly BD200TMT