Black & Decker BDCS40G instruction manual Maintenance, Battery Removaland Disposal, Variable Speed

VARIABLE SPEED

• The spindle speed is dependent upon the speed that you rotate your hand.

• The slower you rotate your hand, the slower the screwdriver turns.

• The faster you rotate your hand, the faster the screwdriver turns.

• If you wish to increase the spindle speed, rotate your hand further in the same direction.

• Ifyouwishtodecrease thespindle speed,rotateyourhandbacktowardstheinitialstartingpoint.

GYRO CONTROL CALIBRATION

This unit automatically re-calibrates itself periodically to ensure proper operation of the motion-based gyro controls. In the event that the unit controls appear to be acting improperly, the unit can be re-calibrated by pressing the motion control activator button, releasing, and letting it rest completely still on a level surface. The LED will flash twice within 5 seconds to indicate that the unit has been successfully re-calibrated.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Toassure product SAFETY and RELIABILITY,repairs, maintenanceand adjustmentIMPORTANT:(other than those listed in this manual) should be performed by authorized service centersor other qualifiedservice personnel, always using identical replacement parts.

BATTERY REMOVALAND DISPOSAL

This product uses lithium-ion rechargeable and recyclable batteries. When the batteries no longer hold a charge, they should be removed from the product and recycled. They must not be incinerated or composited.

The batteries can be taken for disposal to a Black & Decker, Company-Owned or Authorized Service Center. Some local retailers are also participating in a national recycling program (see “RBRCTM Seal”). Call your local retailer for details. If you bring the batteries to a Black & Decker Company-Owned or Authorized Service Center, the Center will arrange to recycle old batteries. Or, contact your local municipality for proper disposal instructions in your city/town.

To1.) removFirst, beforthe batteryattemptingpackto disassemblefor disposal:the product, turn it on and run it in either direction until it stops to ensure a complete discharge of the batteries.

2.) Remove the screws in the product housing and lift the housing half from the tool.

3.) Disconnect the terminal clips from the batteries and lift the batteries out.

4.) Place the battery in suitable packaging to prevent a short circuit of the battery terminals.

5.) Dispose of batteries as per recommended guidelines.

8