TROUBLESHOOTING
• Unit will not start. | • Cord not plugged in. | • Plug tool into a working outlet. |
PROBLEM | POSSIBLE CAUSE | POSSIBLE SOLUTION |
| • Circuit fuse is blown. | • Replace circuit fuse. (If the |
|
| product repeatedly causes the |
|
| circuit fuse to blow, discontinue |
|
| use immediately and have it |
|
| serviced at a BLACK & DECKER |
|
| service center or authorized |
| • Circuit breaker is tripped. | servicer.) |
| • Reset circuit breaker. (If the | |
|
| product repeatedly causes the |
|
| circuit breaker to trip, |
|
| discontinue use immediately |
|
| and have it serviced at a BLACK |
|
| & DECKER service center or |
| • Cord or switch is damaged. | authorized servicer.) |
| • Have cord or switch replaced | |
|
| at a BLACK & DECKER Service |
|
| Center or Authorized Servicer |
For assistance with your product, visit our websitefor the location of the service center nearest you or call thewwwBLACK.blackanddecker& DECKER help.comline at
ACCESSORIESRecommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories,please call:
beWARNING:hazardous. The use of any accessory not recommended for use with this tool could
MAINTENANCEUse only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
To assure product SAFETY and RELIABILITY, repairs, maintenanceand adjustmentIMPORTANT:(other than those listed in this manual) should be performed by authorized service centersor other qualifiedservice personnel, always using identical replacementparts.
SERVICEAll Black INFORMATION& Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. Tofind your local service location, refer to the yellow page directory under
9
