Black & Decker BS600 Maintenance & cleaning, To remove the dispenser, Technical data, English

Models: BS600

1 25
Download 25 pages 9.35 Kb
Page 7
Image 7
•Remove skin from thick skinned fruits, such as melon and pineapple.

Remove skin from thick skinned fruits, such as melon and pineapple.

Remove stones from cherries, peaches, nectarines etc.

Remove the core from apples and pears.

Maintenance & cleaning

The appliance is easier to clean if you do so immediately after use.

Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance.

Clean the motor unit with a damp cloth.

Never immerse the motor unit in water nor rinse it under the tap.

To remove the dispenser

Pull up shield.

Lift up the dispenser.

Move the dispenser forward and out.

To remove the valve from the jug

Turn the jar on an angle so you can grasp the valve easily.

Turn the valve to the unlock position (toward the unlocked padlock picture).

ENGLISH

Pull out as shown. Do not force the valve.

Note: To reassemble, reverse the above procedures and make sure the valve is locked in place before blending again.The small arrow on the valve front will line up with the small arrow on the jar bottom where the locked padlock picture is shown. If the valve is not properly locked in place, ingredients will leak from the drain hole in the bottom of the jar.

Technical data

Voltage

220-240V ~

 

 

Supply

50/60Hz

 

 

Power consumption

450W

 

 

Product Weight

2.5 kgs

 

 

Cord Length

1.2 meter

 

 

7

Page 7
Image 7
Black & Decker BS600 Maintenance & cleaning, To remove the dispenser, To remove the valve from the jug, Technical data