B
A
C
A2
† 1. Mounting Parts
(Part #
A. 16 Spacers
4½"
4¼"
43/16"
41/16"
B.12 Screws
41"
41½"
42¼"
C.4 Washers
2.Mounting Template (in box) You will also need:
•Tape
•Ruler (or you may cut out the ruler provided on the template)
•Electric drill with a ¼” drill bit
GETTING STARTED
•Remove all packing material, labels and any stickers.
•Remove and save literature.
•Unpack mounting parts and set them aside in a safe place where they will not roll away or get lost.
Important: Do not attempt to operate appliance until it is properly installed.
CHOOSE A LOCATION
When choosing your location, consider the following:
•DO make sure to mount within reach of an electrical outlet.
•DO consider your normal work patterns in the kitchen when choosing location.
•DO NOT mount over any heating or cooking appliance such as your range or oven.
•DO NOT mount over or near a sink.
•DO NOT mount under, in front of or behind any
Note: If you are mounting multiple †SpaceMaker™ appliances, they should not be mounted flush to one another. Allow at least 4” of space between appliances for adequate cooling.
Note: If you are connecting this appliance to the receptacle of another †SpaceMaker™ appliance such as the toaster oven or coffeemaker, make sure you can easily unplug the appliance following use.
DETERMINE CABINET TYPE
Prior to installation, determine if your cabinet has a flat bottom (B) or an overhang molding (C). If your cabinet is flat, follow STANDARD INSTALLATION; if the cabinet has an overhang molding, refer to OVERHANG MOLDING INSTALLATION.
B |
| C |
STANDARD INSTALLATION (FLAT CABINET)
Important: Always wear protective glasses or goggles to prevent injury when drilling.
1.Clear countertop under installation area to avoid getting dust or debris on other appliances or items. Open cabinets and remove contents to make mounting easier.
2.Clean both the underside and topside of the bottom panel of the cabinet.
