10
Technical data
EPC126 (H1) EPC146 (H1) EPC186 (H1)
Voltage VDC 12 14.4 18
No-load speed min-1 0-450/ 0-450/ 0-400/
0-1400 0-1500 0-1350
Max. torque Nm 18 20 25
Chuck capacity mm 10 10 10
Max. drilling capacity
Steel/Wood mm 10/25 10/25 10/25
Battery A12/A12E A14/A14E A18/A18E
Capacity Ah 1.2 1.2 1.2
Type NiCd NiCd NiCd
Weight kg 0.5 0.6 0.7
Battery A12NH A14NH A18NH
Capacity Ah 1.5 1.5 1.5
Type NiMH NiMH NiMH
Weight kg 0.6 0.7 0.9
Charger
90500843 90500844 90500845
90500847 90500848 90500849
90500855 90500856 90500857
90500858 90500859 90500860
Input voltage VAC 230-240 230-240 230-240
Output voltage VDC 14.5-15.3 17.4-18.2 21.75-22.6
Current mA 210-220 200-210 210-230
Approx. charging time h 8-10 8-10 8-10
EPC128 (H1) EPC148 (H1) EPC188 (H1)
Voltage VDC 12 14.4 18
No-load speed min-1 0-450/ 0-450/ 0-400/
0-1400 0-1500 0-1350
Max. torque Nm 18 22 25
Chuck capacity mm 10 10 10
Max. drilling capacity
Steel/Wood mm 10/25 10/25 10/25
Masonry mm 10 10 10
Battery A12/A12E A14/A14E A18/A18E
Capacity Ah 1.2 1.2 1.2
Type NiCd NiCd NiCd
Weight kg 0.5 0.6 0.7
Battery A12NH A14NH A18NH
Capacity Ah 1.5 1.5 1.5
Type NiMH NiMH NiMH
Weight kg 0.6 0.7 0.9
Charger
90500843 90500844 90500845
90500847 90500848 90500849
90500855 90500856 90500857
90500858 90500859 90500860
Input voltage VAC 230-240 230-240 230-240
Output voltage VDC 14.5-15.3 17.4-18.2 21.75-22.6
Current mA 210-220 200-210 210-230
Approx. charging time h 8-10 8-10 8-10
Level of sound pressure according to EN 60745:
Sound pressure (LpA) 87 dB(A), uncertainty (K) 3 dB(A)
Sound power (LWA) 98 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Impact drilling into concrete
(ah, ID) 11.4 m/s2, uncertainty (K) 1.5 m/s2
Drilling into metal (ah, D) <2.5 m/s2, uncertainty (K) 1.5 m/s2
Screwdriving without impact (ah, S) <2.5 m/s2, uncertainty (K) 1.5 m/s2

EC declaration of conformity

MACHINERY DIRECTIVE

%

EPC126/EPC146/EPC186/
EPC148/EPC148/EPC188
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-1
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
le and makes this declaration on behalf of Black & Decker.
_Kevin Hewitt
Vice-President Global Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
20/07/2010