English
Inspection and repairs
•Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
•Do not use the appliance if any part is damaged or defective.
•Have any damaged or defective parts repaired or replaced by an authorised repair agent.
•Before use, check the power supply cord for signs of damage, ageing and wear.
•Do not use the appliance if the power supply cord or mains plug is damaged or defective.
•If the
•Never attempt to remove or replace any parts other than those specified in this manual.
•Do not attempt to repair the appliance. Take it to your nearest Black & Decker- owned or authorised Service Centre for repair.
Electrical safety
This product must be earthed.
Always check that the power
supply corresponds to the voltage on the rating plate.
Extension cables & class 1 product
A 3 core cable must be used as your tool is earthed and of class 1 construction.
Additional safety instructions for
Toasters
•Do not immerse the appliance, cord set or plug in liquids
•Always leave sufficient space around the appliance for ventilation
•Do not use the unit if you have wet hands or bare feet.
•“Switch off the appliance before changing accessories or approaching parts which move in use”.
•The bread may burn, therefore do not use the toaster near or below combustible material, such as curtains.
Assembly
This appliance is supplied fully assembled
&only requires parts to be cleaned before use. See “Cleaning” for details.
Use
Place the bread to be toasted in the Toasting slots (1). One or two slots may be used at a time. Move the browning control
(5) to the required setting.
