Black & Decker FP1200 manual Care and Cleaning, How To Use The Chopping Blade

4.Plug the cord into an electrical outlet.

5.Use the Food Guide to help you prepare food for slice/shred processing. Fill the Food Chute with food and position the Pusher over the food.

6.Select the Hi or Lo Speed, then press down lightly but firmly on the Food Pusher while pressing the desired PULSE or ON Control.

NOTE: Let the Processor do the work. Heavy pressure will not speed up opera- tion. Do not use the Processor continuously for more than 3 minutes at a time.

7.After processing food, release the PULSE button or press the control to OFF. Allow the Disc to stop rotating. Twist the Food Chute/Cover toward UNLOCK to remove the Cover.

8.Grasp the Disc Hub and lift out. Carefully pull the Slice/Shred Disc off the Stem, unlock the Bowl by turning the handle away from its Base, and lift the Bowl off.

How To Use The Chopping Blade
The Chopping Blade speeds up many tasks,
depending upon the food and the method used. Its
special design processes food quickly and evenly.
It can chop, crumb, grind, mince and mix.
1. Place the Bowl over the Center Post in the Base
with the handle at the left. Turn the Bowl
towards the Base until it drops down into place.
Snap the Bowl in towards the Base and be sure	C
the Locking Tabs lock into place (see A).

2.Grasp the Chopping Blade by its center shaft

and slide it down onto the Center Post. (C) Fill the Bowl with food.

3.Place the Food Chute/Cover onto the Bowl so that its Tab is facing the Base (see B) Twist the Food Chute/Cover in toward the Base to LOCK until you hear it click into place.

4.Plug the cord into an electrical outlet.

5.Use the Food Guide to help you prepare food for chopping/dicing/mincing/ mixing/crumbing.

6.Select the Hi or Lo Speed, then press the desired PULSE or ON Control. When pulsing, hold the PULSE position for about 2-3 seconds: check results; repeat if needed for desired consistency. It is better to use several short operations rather than one long operation unless mixing ingredients that require longer processing times.

7.After processing food, press the control to OFF or release the PULSE button. Allow the Chopping Blade to stop rotating. Twist the Food Chute/Cover toward UNLOCK to remove the Cover.

8.Grasp the Chopping Blade by its shaft and remove. Unlock the Bowl by turn- ing it away from its Base, and lift it off. Empty the processed food.

Care and Cleaning

NOTE: Do not attempt to sharpen the cutting edges of the Chopping Blade or the Reversible Disc. They are permanently sharpened at the factory and will be ruined by attempted sharpening.

5

Cover