90508554 Circ Saws REV 8/22/06 1:22 PM Page 5

•SUPPORT AND SECURE THE WORK PROPERLY. Insure that the material to be cut is clamped and solidly supported and balanced on a strong, stable and level work surface. Support the work so that the wide portion of the saw shoe is on the portion of the material that doesn’t fall after the cut is made. Never hold cut off piece by hand. KICKBACK from blade pinch can result. Keep both hands on saw at all times.

•STAY ALERT AND EXERCISE CONTROL. Keep body positioned to one side of blade. Always maintain a firm grip and control of saw with both hands. Do not change hand grip or body position while saw is running. Take precaution to avoid injury from cut off pieces and other falling material during operation.

DANGER: RELEASE SWITCH IMMEDIATELY IF BLADE BINDS OR SAW STALLS.

GUARD AGAINST KICKBACK

•KICKBACK CAN BE CAUSED BY the saw blade becoming pinched, twisted or bound while cutting, or when the saw stalls. When the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the cut and move suddenly back toward the operator.

TO REDUCE THE RISK OF KICKBACK

•Keep a firm grip on saw with both hands at all times.

•Stay alert – exercise control.

•Support long overhanging materials. As the material is cut and weakens, it will sag, causing a pinched blade.

•Support large panels as shown. Material supported only at the ends will lead to blade pinching.

•Avoid sawing overhead. Material can sag and will pinch blade.

•Keep blades sharp and clean.

•Use fence or straight edge guide when ripping. Be careful as the cut off strip can sag or twist, closing the cut and pinching the blade, leading to KICKBACK.

•Don’t force tool. Wood variables such as knots, hardness, toughness, wetness, pressure treated and freshly cut green lumber can heavily load the saw which can lead to stalling. Push the saw slower when this occurs.

•Don’t remove saw from work during a cut while the blade is moving.

•Allow saw to reach full speed before blade contacts material to be cut. Starting the saw with the blade against the work or pushed forward into cut can lead to stalling or sudden backward movement of saw.

•Never attempt to lift saw when making a bevel cut. This leads to blade binding and stalling.

•Always secure work to prevent workpiece movement during cut.

•Do not try to force saw back on line if your cut begins to go off line. This can cause KICKBACK. Stop saw and allow blade to coast down to a stop. Withdraw from cut and start a new cut on the line.

•Set depth adjustment of saw such that one tooth of the blade projects below the workpiece as shown.

•Do not back up a rotating blade in the cut. Twisting the saw can cause the back edge of the blade to dig into the material, climb out of the work and run back toward the operator.

•Avoid cutting nails. Inspect for and remove all nails from lumber before cutting.

•Some wood contains preservatives such as copper chromium arsenate (CCA) which can be toxic. When cutting these materials, extra care should be taken to avoid inhalation and minimize skin contact.

SAFETY INSTRUCTIONS - LASERS

DANGER: Laser radiation, avoid direct eye exposure, serious eye injury can result.

•Do not use optical tools such as a telescope or transit to view the laser beam.

•Position the laser so unintentional eye contact will be avoided.

•Do not operate the laser around children or allow children to operate the laser / power tool.

•Do not disassemble. Modifying the product in any way can increase the risk of laser radiation.

WARNING: Use of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous laser radiation exposure.

•Do not adjust the laser, when the battery is inserted in the circular.

•Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.

•Store idle product out of reach of children and other untrained persons. Lasers / power

5

Page 4 Page 6
Page 5
Image 5
Black & Decker FS2406CS, FS1807CS Safety Instructions Lasers, Guard Against Kickback, To Reduce the Risk of Kickback
Page 4 Page 6

FS1807CS, FS1806CS, FS2407CSL, FS1806CSL, FS2406CS specifications

The Black & Decker line of handheld vacuums, including the FS2406CS, FS1806CSL, FS2407CSL, FS1806CS, and FS1807CS, represents a blend of innovative technology and user-friendly design. These models are tailored to meet the needs of modern consumers seeking convenience and efficiency in cleaning.

The FS2406CS is designed with a powerful motor that delivers excellent suction capabilities, making it ideal for tackling everyday messes such as crumbs, pet hair, and dirt. Its lightweight construction ensures that users can maneuver it easily, while the ergonomic handle provides a comfortable grip during operation. The detachable, washable dust bowl simplifies maintenance, allowing for quick and easy emptying without the fuss of bags.

The FS1806CSL and FS2407CSL offer similar power and ease of use but incorporate additional features that cater to specific needs. These models come equipped with various attachments, including crevice tools and dusting brushes, enhancing versatility and enabling users to clean different surfaces efficiently. These attachments are particularly beneficial for reaching tight spaces or delicate surfaces.

Another standout feature across these models is the advanced filtration system. The HEPA filters trap allergens and dust particles, contributing to a healthier home environment. This aspect is particularly appreciated by allergy sufferers, as it helps reduce airborne particles significantly during the cleaning process.

The FS1806CS and FS1807CS models focus on maximizing runtime and charging convenience. With their lithium-ion batteries, users can expect longer operational periods without compromising power. The inclusion of a quick-charging dock ensures that vacuums are always ready for use, making them a practical choice for busy households.

In terms of design, all models boast a sleek and compact profile, ensuring easy storage when not in use. The color choices are thoughtfully selected to suit a variety of home aesthetics, helping them blend seamlessly into your living space.

Overall, the Black & Decker FS2406CS, FS1806CSL, FS2407CSL, FS1806CS, and FS1807CS exemplify modern vacuum technology, combining powerful suction, versatile attachments, efficient filtration, and user-friendly designs to create a range of cleaning solutions that cater to various needs and preferences. Perfect for quick cleanups or thorough cleaning sessions, these vacuums make maintaining a clean and comfortable home more accessible than ever.
Top Page Image Contents