ENGLISH

(Original instructions)

Note: Ensure the filler cap is firmly secured.

Note: Do not use chemical cleaners with your steam mop..

Attaching the carpet glider (Fig. G) (For use on carpets only)

uPlace carpet glider on the floor.

uAttach a cleaning pad to the unit.

uLightly press the steam mop down onto the carpet glider

(14)until it clicks into place.

Caution! Always place your steam mop with the handle (10) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Removing the carpet glider (Fig. G)

Caution! Always wear suitable shoes when changing the carpet glider on your steam mop. Do not wear slippers or open toed footwear.

uReturn the handle (10) to the upright position and turn the steam mop ‘OFF’.

uWait until the steam mop cools down. (approximately five minutes)

uPlace the front of your shoe onto the carpet glider removal tab (22) and press down firmly.

uLift the steam mop up off the carpet glider (14).

Caution! Always place your steam mop with the handle (10) in the upright position when stationary and make sure the steam mop is turned off when not in use.

Fitting a scent pack (Fig. I & J)

Warning! Return the handle (10) to the upright position and turn the steam mop ‘OFF’. Wait until the steam mop cools down. (approximately five minutes).

uSlide the door release button (35), the door will open.

uPlace the scent pack into the cavity (36).

uClose the door (37) py pushing it firmly down.

Attaching the hose and accessories to the Hand held steam cleaner (Fig. K & L)

Warning! Inspect the seal (26) on the steam nozzle (4) and hose (27) before each use. If the seal is missing or damaged then please contact your nearest authorised repair agent. Do not use the appliance.

Attaching the hose (Fig. K)

uPress in the clips (28) on either side of the hose (27).

uPress the hose (27) onto the steam nozzle (4) and release the clips (28).

Important! Ensure that the hose (27) is securely fastened before using the hand held steam cleaner. If steam escapes from the joint then the hose is not correctly fit, allow the unit to cool then remove and re-fit the hose.

Attaching the variable steam jet nozzle (Fig. L)

uPress in the clips (30) on either side of the variable steam jet nozzle (31).

uPress the variable steam jet nozzle onto the steam nozzle

(4)or the hose (27) and release the clips (30). Important! Ensure that the variable steam jet nozzle (31) is securely fastened before using the hand held steam cleaner. If steam escapes from the joint then the variable steam jet nozzle is not correctly fit, allow the unit to cool then remove and re-fit the variable steam jet nozzle.

Attaching other accessories (Fig. J)

uAlign the lugs on the hose with the recesses on the acces- sory.

uPress the accessory (29) onto the hose (27) and twist anti-clockwise until the accessory clicks into place.

Note! The variable steam jet nozzle may be used without the hose by fitting them directly to steam nozzle. All other acces- sories must be connected to the hose for use.

Removing the hose and accessories(Fig. K & L)

Warning! The Steam nozzle, variable steam jet nozzle, hose and accessories become hot during use. Allow the unit and all accessories to cool before removing any accessories.

Removing an accessory (Fig. K)

uTwist the accessory (29) clockwise then pull away from the hose (27).

Removing the hose (Fig. K)

uPress in the clips (29) on either side of the hose (27) and pull away from the steam nozzle (4).

Removing the variable steam jet nozzle (Fig. L)

uPress in the clips (30) on either side of the variable steam jet nozzle (31) and pull away from the steam nozzle (4).

Use

Important! This unit will kill 99.9% of bacteria & germs when used in accordance with this manual and with the micro fibre pad fitted and a continuous run time of 90 seconds.

Switching on and off (Steam mop)

uTo switch the appliance on, press the ON/OFF button (1). It takes approximately 15 seconds for the steam mop to heat up.

Note: When the steam mop is first turned on the water res- ervoir will glow red. Once the steam mop is ready to use the water reservoir will glow blue.

uTo switch the appliance off, press the ON/OFF button (1).

6

Page 5 Page 7
Page 6
Image 6
Black & Decker FSMH16151, FSMH1621S manual Use
Page 5 Page 7

FSMH1621S, FSMH16151 specifications

Black & Decker, a brand synonymous with quality and innovation in home appliances, offers a range of versatile steam mops, including the FSMH16151 and FSMH1621S models. These steam mops are designed to make household cleaning more efficient and effective, utilizing advanced technologies to handle tough stains and maintain pristine floors.

One of the standout features of the FSMH16151 and FSMH1621S is their impressive steam generation. Both models utilize a rapid heating system that allows users to quickly heat up the water and deliver powerful steam in under 30 seconds. This quick start time means less waiting and more cleaning. The steam mop also boasts an adjustable steam feature, allowing users to select the right level of steam based on the type of floor being cleaned and the level of dirt present. This flexibility ensures that users can tackle everything from light dusting on delicate surfaces to heavy-duty scrubbing on tougher stains.

Another notable characteristic is the built-in SmartSteam technology. This innovative technology automatically adjusts the steam output to suit various cleaning surfaces. Whether you are dealing with hardwood, tile, or laminate, the FSMH16151 and FSMH1621S are engineered to provide optimal cleaning performance while protecting your floors from excessive moisture and heat.

The design of both steam mops is user-friendly, featuring a lightweight construction that makes maneuverability a breeze. The swivel steering offers easy access to corners and tight spaces, maximizing cleaning efficiency. Additionally, the large water tank capacity reduces the need for constant refills, allowing for extended cleaning sessions without interruption.

Simplifying maintenance, these models come equipped with washable and reusable microfiber pads. These pads effectively trap dirt and grime, and their reusable nature makes them an eco-friendly option compared to disposable cleaning cloths. The convenience of being able to toss the pads in the washing machine after use ensures hygiene and sustainability.

Safety is also a top priority in the design of these steam mops. They are built with an automatic shut-off feature that activates when the unit is not in use, providing peace of mind for users.

In summary, the Black & Decker FSMH16151 and FSMH1621S steam mops stand out in the crowded market of cleaning appliances. With their rapid steam generation, SmartSteam technology, user-friendly design, and eco-friendly cleaning pads, they promise to make home cleaning more efficient and enjoyable. These steam mops are ideal companions for maintaining a clean and healthy living environment.
Top Page Image Contents