639224-00 FSNS100 Stapl 12/14/05 7:26 AM Page 11

TROUBLESHOOTING

Disconnect tool from air supply before performing any Service

Procedure.

SYMPTOM PROBLEMSSOLUTIONS

1.Air leak near top of tool or in trigger area.

Loose screws.

Tighten screws.

Worn or damaged

B&D service for overhaul.

o-rings or seals.

 

2.Tool does nothing or operates sluggishly.

Inadequate air supply.

Verify adequate air supply.

Inadequate lubrication.

Put 5 or 6 drops of oil into air inlet.

Worn or damaged

B&D service for overhaul.

o-rings or seals.

 

3.Air leak near bottom of tool.

Loose screws.

Tighten screws.

Worn or damaged

B&D service for overhaul.

o-rings or bumper.

 

4.

Tool jams frequently. Incorrect fasteners.

Verify approved fasteners of

 

 

correct size.

 

Damaged fasteners.

Replace w/undamaged fasteners.

 

Magazine or nose

Tighten screws.

 

screws loose.

 

 

Magazine is dirty.

Clean magazine.

 

Driver is worn or damaged. B&D service for driver maintenance.

 

 

 

5.

Other.

Contact a Black & Decker

 

 

Service Facility.

ACCESSORIES

Recommended accessories for use with your tool are available from your local retailer.

The use of any accessory not recommended for use with this tool could be hazardous.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and authorized service locations throughout North America. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.

Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.

To find your local service location, refer to the yellow page directory under “Tools— Electric” or call: 1-800-544-6986.

FULL TWO-YEAR HOME USE WARRANTY

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

11

Page 11
Image 11
Black & Decker FSNS100 Troubleshooting, Accessories, Service Information, Full TWO-YEAR Home USE Warranty