• Never point tool at yourself or others in work | Fig. 3 | |
area. Serious injury or death may occur if the tool | ||
| ||
is activated. (Fig. 3) |
| |
|
|
• Never use oxygen or other bottled gasses. | Fig. 4 | |
Explosion will occur. Never use combustible | ||
| ||
gases or any other reactive gas as a power |
| |
source for this tool: explosion and serious |
| |
personal injury will result. (Fig. 4) |
| |
|
|
• Wear ear protection to | Fig. 5 |
possible hearing loss. Ear protection equipment |
|
must conform to ANSI S3.19 requirements. (Fig. 5) |
|
|
|
• Use clean, dry, regulated, | Fig. 6 |
70 to 120 PSI, (4.8 to 8.3 BAR). (Fig. 6) |
|
•Do not connect tool to pressure which potentially exceeds 200 PSI (13.7 BAR).
•All air line components (hoses, connectors, filters, regulators, etc.) must be rated for a maximum working pressure of at least 150 PSI (10.3 BAR) or 150% of the maximum system pressure, which ever is greater.
•Connect tool to air supply hose with a coupling that automatically removes all pressure from the tool when the coupling is disconnected. (Fig. 7).
•Disconnect tool from air supply hose before doing tool maintenance, clearing a jammed fastener, leaving work area, moving tool to another location, or handing the tool to another person. (Fig. 7)
•Never use a tool that is leaking air, has missing or damaged parts, or requires repair. Make sure all screws and caps are securely tightened.
(Fig. 8).
•Never use tool if safety, trigger or springs are inoperable, missing or damaged. Do not alter or remove safety, trigger, or springs.
Make daily inspections for free movement of trigger and safety mechanism. (Fig. 8)
Fig. 7
Fig. 8
3
