ENGLISH
This appliance is double insulated in accordance with EN
•To avoid the risk of electric shock, do not immerse the cord, plug or motor unit in water or other liquid.
•Check that the supply voltage shown on the rating plate of the appliance matches that of your electrical system. Any connection error will invalidate the guarantee.
Mains plug replacement
If a new mains plug needs to be fitted:
•Safely dispose of the old plug
•Connect the brown lead to the live terminal of the new plug
•Connect the blue lead to the neutral terminal
•If the product is class I (earthed), connect the
green/yellow lead to the earth terminal
Warning! If your product is class II double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal
•Follow the fitting instructions supplied with good quality plugs
•Any replacement fuse must be of the same rating as the original fuse supplied with the product.
Warning! The above section on mains plug replacement is for authorized service centre personals.
Assembly
Wash all detachable parts (see chapter ‘Maintenance and cleaning’).
Assembling the food processor
1.Fit the food processor jug (H) onto the food processor base (I), secure it by turning it clockwise.
2.For chopping or kneading fit the required blade (F or E) onto the primary blade holder
(G).
3.For shredding or slicing, fit the required blade (D2, D3, D4, D5, D6 or D7) into the secondary blade holder (D1).
4.Place the assembled blade and holder into the food processor jug (H).
5.Fit the food processor lid (C) and secure it by turning it clockwise.
6.Fit the measuring jug (B) into the pusher (A) and then place the pusher into the food processor lid.
Note: The blender cover (M) must be in place for the food processor to work.
Assembling the blender
1.Remove the blender cover (M) from the food processor base by turning it clockwise and lifting it off.
2.Place the blender jug (S) onto the blender drive (L) and secure it by turning
3.Fit the blender lid (T) to the blender jug (S) and secure it by turning it
4.Fit the filler cap (U) to the blender lid (T) and secure it by turning it
Assembling the grinder
1.Fit the grinder jug seal (O) into the grinder jug (P).
2.Fit the grinder blade (N) into the grinder jug and secure by turning it clockwise.
3.Place the grinder jug (P) onto the blender drive (L) and secure it by turning
Assembling the citrus Juicer
1.Fit the food processor jug (H) onto the food processor base (I), secure it by turning it clockwise.
6
